- Toy Accessories[54]
- Battery Packs[1]
- Rechargeable Batteries[5]
- Battery Testers[1]
- Shafts[1]
- Deep Groove Ball Bearings[1]
- Tool Parts[4]
- Machinery Stock[2]
- Other Hand Tools[1]
- Pliers[2]
- Screwdriver[3]
- Tool Sets[3]
- Gauges[1]
- Contact Person : Mr. yang mike
- Company Name : Shenzhen Xingyuansen Tech. Dev. Co., Ltd.
- Tel : 0086-0755-33211801
- Fax : 0086-0755-33211802
- Address : Guangdong,shenzhen,buji zuotingyouyuan south 2 building 2cell NO. 10D
- Country/Region : China
- Zip : 518124
G104 Gyro /head lock gyro for rc helicopter
Detailed Product Description
G104 Gyro /head lock gyro for rc helicopter
Specifications:
- Input power : 4.5-6v
- Input signal : 1.0 - 2.0ms
- Weight : 6.5g
- Size : 30 x 18 x 8.3 mm
User Guide:
- The G104 Gyro is designed for 6ch and up R/C system only. sensitivity of the gyro can be make viathe transmitter Rudder ATV and/or thronght the switches on the gyro unit
- Connect the gyro to the rudder channel of the receiver and the gain control , wire should be conn-nected to AUX channel (Signal) of The receiver. Connect the rudder servo to gyro . Turn on the powe of ther transmitter then the receiver .place the AUX switch on the transmiter in the down position (ratehold , the LED on the gyro is turn Green)
- Make sure the servo arm at the center position Adjust the length of the rudder control rod to meet the full traveling range of the rudder of the rudder.In initial flying , the adjustment should be done unde rate holding mode . When the initial setting is completed and Check the correct rudder movement during low altitude.
- If the rudder control drift one way. put your helicopter down on the ground and adjust the length of the rudder control rod . After finishing the adjustment , turn the gyro to head holding mode (place AUX suitch on the transmitter in the up position) , the sensitivity of the gyro should be between 70%-80% .
Recommendation:
- Fit :Walkera #36, #60, #68B
- Fit:Esky king2, king3, belt- cp, belt cp v2
- Fit:ALIGN TREX 450, 500, 600(battery powered) ,E-flite 400
- Especial for ALGN TREX 250
Do not deprecate this weenie stuff !
- It`s quality is as good as the Futaba GY401
- But the price is much much much lower
- less weight and higher quality is better for your heli
- It has been tested on Trex 250, 450, 500, 600 battery powered rc helicopter for 3D flying action
what you waiting for?
Nothing ! but the G104 Mini head lock gyroAction on it
Item Included:
- E-TECH G104 : 1 Unit
- English User : 1 Unit
- New Box : 1 Unit
